Before we attach deck to the hull, we fixed B/H which is stn 11 because the flange which made for this B/H would not work. Thus, we made holes on the B/H for putting some glue to attach the hull. After that, we put some glue on the flange which is on the top side and transom as well. After attach the deck to the hull, we made some piece of block to push the deck to the flange like the picture as aboved. However the problem is that the B/H which i made and cut off is not touch the side deck. I thought it's going to be down but it wasn't. Thus, I realised that i should find out how the side deck going to be done. When we turn the boat over, I found some gap and over glueing which we have to sand it off. Hence, next time we need to plane and sand to take this off as well as filll in the gap.
No comments:
Post a Comment