flange.

Today, I asked Chris to the flange of top side that how it going to be done because I knew it but wasn't quite sure. Chris explained to me as he was sketching. I like this. First of all, we talked about the purpose of the flange. I was thinking it's supporting things when we attach something. For example, if we attach deck to hull, we need to something hold it otherwise it might fall down or crush, so we made temporary flanges and then we are going to cove it underneath as well as glss laminate. We also talked about problem solving. Chris told me that it is typical teaching style of kiwi. When they working on something, they always try to think and challenge for solving problems themselves. However it is unsual to me because we were educated follow teacher. They nomally tell us what to do something and we don't have many question and challenge during the class. Anyway I realised that this way improve our problem-solving as well as creativity.
In addition, we don't forget the knowledge well and to be able to keep that memory for a long time.

deck

Before the deck vacuum, we need to make the rebates so we figured out how many and where is going to be then make a sanding block to sand foam down. Why we make the rebate is that if we glass on it the two glass which is atf and foward going to be overlaped so make it fair surface. After that, we started vacuuming with we prepared for that. When you put resins on the glass and peel play, you make sure that air free.

Vacuuming floor - you can see the nice cove of this picture, after cove the floor, we prepared to vacuum the floors. It's same way when we was vacumming the other thing exept the uni carbon. The stack is that uni carbon - glass lami - peel ply - perf plastic - mash - vacuum bag. You need to make the vacuum bag being wide enough. Otherwise you cannot have enough room for wrinkle.