make stems - set up laminating block follow the plan which is scale 1:1. when you set up these, you should make sure set up it properly and screw both sides front and back which is more hold. After steaming, you have to hold it very quickly because if it getting cold, you will be hard to bend it. The laminating process will be holded by clamps with piece of wood which protect doesn't scratch on stem surface and when it holding, work with your team members because it much easier and quicker.
reply to comments.
hi chris~ i have changed in Elglish ~ the steam was very hot. when i take timber out, i coudln't stay my hand in the steam long time and smell like a sauna. i left these about 20minute before these take out. But it going to be cold very quickly even though these was steaming for 20minutes
nice blog, but one thing, remember to change your blog language to English~~~:)
ReplyDeleteHow is it?
ReplyDeleteThanks Wei for commenting on this as I would have great difficulty reading the words if they are not in English!
Good blog so far Youngtae.
How hot was the steam?
How long did you leave the timber in the steam box for before you bent it around your jig?
I'm looking forward to how you answer these questions.
Cheers